bluetooth mobile printer

In order to connect your Bluetooth-enabled device to our 58mm thermal printer, please follow these steps: Ensure that both your device (e.g., smartphone, tablet, computer) and the thermal printer support Bluetooth connectivity. Turn on the Bluetooth function on both your device and the thermal printer. Then go to the Bluetooth settings. On the thermal printer, put it in pairing mode. Once the printer is in pairing mode, it should appear in the list of available Bluetooth devices on your device. Please find and choose your printer model. Your device will attempt to establish a connection with the printer. If prompted, enter a PIN code or confirm a pairing request. Some printers have a default PIN code (e.g., "0000" or "1234"), while others may require you to set up a PIN code during the pairing process. Check the printer's documentation for the correct PIN code or instructions on setting one. After successfully pairing with the thermal printer, your device should indicate that the connection is established. The printer should also show a successful connection status. Now can use applications or software on your device that support bluetooth printing and start your print job.  

In recent years, tattoo printing technology has improved significantly, and thermal tattoo printers are becoming increasingly popular. These specialized devices allow tattoo artists to transfer the design of a digital image to the skin with precision and ease. Before using a tattoo printer, you need to have a clear and high-resolution design that you want to transfer to the skin. Ensure that the size and location of the design are in line with the customer's preferences. Connect the tattoo printer to your computer or mobile device via usb or Bluetooth. Install any necessary software or drivers that the printer needs to communicate with the device. Make sure the printer is turned on and properly loaded with tattoo transfer paper. After adjusting the printer Settings, send the print command to the tattoo printer. Make sure the tattoo transfer paper is inserted correctly, print side down. Allows the printer to complete the printing process. After printing, carefully remove the tattoo transfer paper from the printer. Use scissors to trim excess paper around the pattern, leaving small edges around the edges. Clean and prepare the skin area for tattoo. Press the tattoo transfer paper, printed side down, into the desired position on the skin. Apply even and gentle pressure to ensure that the paper is in full contact with the skin. After a few seconds, start at a corner of the skin and carefully peel off the tattoo transfer paper. The tattoo design should now be transferred to the skin. Let dry for a few minutes before you begin tattooing. Using a tattoo printer simplifies the process of transferring complex patterns to the skin. Happy tattoo!